SEA's thermosyphon solar water heater system is a well-designed solar water heater system and is a good investment in saving energy - an investment that will pay for itself several times over through the years that it works. The thermosyphon solar water heater is one of the least complex, most affordable and most cost-effective investments for selecting a solar energy application product.
The water tank of a thermosyphon system usually does not require any pumps and controllers to operate in its simplest form – using the pressured water connection would allow the system to operate effectively as an on-demand hot water system. In most application, the thermosyphon system is mounted on the roof or a certain high position, where the hot water automatically flow down to the usage point by gravity or hydrostatic pressure.
The thermosyphon system could also be installed in any location around the usage point where convenient for installation, and a in-pipe pump could be used to increase hot water pressure if necessary.
Features of SEA thermosyphon solar water heater system
-
Fully integrated thermosyphon type water heater with environment friendly polyurethane foam insulated stainless steel water tank
-
Adjustable mounting frame for flat roof or sloping roof installation
-
Well tempered Boron Silicate glass vacuum tube solar heat collector and well insulated storage tank ensures all seasons hot water supply
- Simple to install and operate, with almost no maintenance required. No power supply problem Rugged constructions and special coating technology allows min 15 years of free hot water service
-
Operable in cold environment where winter temperature falls to below -30 °C.
-
Basic unit works on manual filling of water. Automatic filling or control system are optional
-
Backup electrical heater can be added
- Perfect for remote areas or areas with little or no electricity
The 15 vacuum tube system (tank size 39G) include:
- 1 SEA-ZC58-15 mounting frame
- 1 SEA-ZC-15 storage tank (unpressurized)
- 15 Vacuum Tubes (58 x 1800 mm)
The 18 vacuum tube system (tank size 42G) include:
- 1 SEA-ZC58-18 mounting frame
- 1 SEA-ZC58-18 storage tank (unpressurized)
- 18 Vacuum tubes (58 x 1800 mm)
The 24 vacuum tube system (tank size 52G) include:
- 1 SEA-ZC58-24 mounting frame
- 1 SEA-ZC58-24 storage tank (unpressurized)
- 24 Vacuum tubes (58 x 1800 mm)
Optional add-on:
- Thermosyphon solar water heater system controller
- 1/2" form pipe cover insulation
- 40 foot PEX pipe 3/4"
- Copper fittings (coupling, 90 Elbow, sweat coupling, etc.)
- Tank water auto-feeding control tank (mechanical control)